Winchester cannon replacement parts

All parts are new factory replacements
(1898 Standard Black parts shown, Chrome & Brass parts also available)


Barrel with breech closed	Hammer in "cocked" position	Breech open	View beneath Showing extractor set screw	Breech open showing extractor	Breech sub assembly $ 119.28 Items marked with ** are parts in the breech sub assembly.

Many people ask, "What is the proper orientation for the elevator".
The patent drawings show the answer.

If parts are under 2 lbs, select US Priority Mail, over 2 lbs select UPS.

Axle $ 13.65	Axle nut** Specify if pre 1958 cannon! $ .54	Axle pin (cotter pin) $ .66	Breech bolt $ 30.84 **	Breech bolt handle $ 7.38 **
Breech bolt stop pin $1.74 **	Breech hinge $ 33.96 **	Breech hinge pin $ 2.64 **	Crossbar $ 13.44	Crossbar screw $ 2.16
Elevating screw Specify if pre 1958 cannon! $ 10.74**	***Extractor To have the extractor replaced, the cannon, or barrel only, needs to be shipped back to us. Click here to see this procedure $ 58.00	Extractor stop screw (For post 1972 cannons) $ 1.74	Frame - Right side $ 45.06	Frame - Left side $ 45.06
* See below Hammer $ 33.60 **	Lanyard with ring $ 8.10 **	Main spring $ 18.24	Main spring screw $ 5.94	Tie rod $ 1.86
Tie rod nut $ 1.74	Tie rod sleeve $ 5.76	Wheel $ 15.48	Pine Box with logo (Outside dimensions are: 9x9x18.75 inches) $ 30.12	Barrel assembly (complete) Due to license, old barrel must be sent in for replacement. $ 371.70

* Hammer (firing pin) On pre-1958 cannons there was a small steel wheel assembly located on the bottom of the hammer (see close-up below). This "rode" on the spring when the hammer was pulled. This was done away with in the 1970's. New, replacement hammers do not have the wheel.

** Axel nut and elevator threads are different on pre 1958 cannons.
Specify when ordering

*** Extractor; Replacing a extractor requires the cannon or barrel to be
sent back. Click here to see this procedure.

Some parts may be required to be custom fit, i.e., the breech assembly may need filing in order to function properly. If you are not handy with small machining (filing / sanding), we don't recommend replacing some parts yourself.

How to order:

Most Winchester cannon parts will be sent via Priority US Mail to save you money on shipping charges. Be careful with your selection as parts are not returnable. Email or write to us if you are uncertain about what to order.

Cannon-Mania, LLC
110 Industrial Park Dr
Suite B-7
Cumming, GA 30040

Toll free telephone: 866 976 2642
(Georgia local 678 513 9977)

Click on picture
Can I add rubber tires to my standard chrome cannon?
Yes, you can, however you need new metal wheels, a axel, spacers and acorn nuts. The wheels are machined to accept & hold the rubber tires as shown in the picture. Because the tires are wider, a longer axel is needed with spacers.